Maintenance And Safety Check; Description Of The Remote Control Units - Jackle ProTIG 220AC Betriebsanleitung

28. Maintenance and safety check

This unit should be serviced in regular intervals dependent on Operating times and working place conditions.
Before opening the machine switch off the plug!
- Clean unit inside by vacuum cleaner according to degree of soiling.
Attention:
This Welding unit has to be safety checked every year by JÄCKLE Company or another special qualified
electrician according to the harmonized standard
IEC 60974 – 4
Safety, maintenance and inspection of arc welding equipment in use

29. Description of the remote control units

The following remote controls are available on the machine:
- TIG welding torch with up / down buttons:
Only a torch with 1 torch trigger and optional up / down buttons can be connected to the machine.
With the torch trigger, the welding process is started and ended.
With the up / down buttons the power of the machine can be adjusted up and down.
NOTE: If the Job menu (Chapter 21) is activated it can be changed with the up / down keys to move between
stored jobs.
- Foot pedal – foot remote control FF5i:
With the optional foot pedal FF5i, the welding process can be started and stopped. Using the pedal, the
welding power can be changed from minimum to the currently selected maximum power (with the knob).
The maximum power can be adjusted in standby mode with the rotary knob.
NOTE: The foot pedal works only in 2-cycle mode. In addition, the slope up and slope-down time should be
set to 0.
- Hand remote control FW 11i – only for electrode welding:
With the optional hand remote control FW 11i, the welding power can be changed from minimum to the cur-
rently selected maximum power (with the knob).
The maximum power can be adjusted in standby mode with the rotary knob.
NOTE: The hand remote control FW 11i works only in electrode mode.
Operating manual
Handfernsteller Fußpedal
Poti Poti
10k
E D C B A E D
E
Fernbedienungsdose 5-polig
Remote control socket 5-pole
Up/Down Brenner
Up/Down Torch
BT DW UP
10k
C B A E D C B
D C B A
ProTIG 220/300 AC/DC
BT
A
Page 38