Intended Use; Getting Started; Unpacking And Equipment Supplied; Installing The Balance - Sartorius Quintix Installations- Und Bedienungsanleitungen

Danger of Explosion!
Do not use this equipment in hazardous areas in
which explosive materials are present.
Make sure that the voltage rating printed on the
AC adaptor is identical to your local mains voltage.
Installation Information
Do not operate the balance if its housing or AC
adaptor, including all connections, are damaged.
Immediately disconnect the damaged device from
the power by pulling the plug.
Do not expose the balance, its AC adaptor or the
accessories supplied by Sartorius to extreme temper-
atures, aggressive chemical vapors, moisture, shocks,
vibration, or strong electromagnetic fields.
Observe the conditions of operation described in the
Specifications!
Installation information:
The operator shall be solely responsible for any
modifications to the equipment and for connecting
any cables or equipment not supplied by Sartorius.
Information on operational quality is available upon
request from Sartorius.
You should only use peripherals supplied by Sartorius.
Observe the IP protection class of the balance and
AC adaptor. Do not allow liquid penetration.
The protection class indicates the suitability of
devices for various ambient conditions (humidity,
foreign bodies).
Before cleaning the AC adaptor or the balance:
Unplug from the mains power.
The balance may only be opened by specialized
personnel trained by Sartorius. Do not open the
AC adaptor.
Warnings for Installation and Operation of the Device:
If glass breaks, there is a risk of injury posed by
cuts on glass edges.
Lay the cables where they pose no risk of causing
someone to trip.
Observe the additional safety and danger information in the follow-
ing chapters.

Intended Use

This high-resolution balance is exclusively for use in laboratories
and indoors under normal atmospheric conditions. It was developed
specifically for the exact determination of the mass of materials in
liquid, paste, powder, or solid form. Appropriate containers must be
used for each type of sample material.
They are designed to be used exclusively indoors under normal
atmospheric conditions.
4
Installation and Operating Instructions Secura, Quintix, Practum

Getting Started

The balance must be disconnected from the mains
power for all assembly work.

Unpacking and Equipment Supplied

t
Open the packaging, making sure to dispose of all parts carefully.
t
After unpacking the device, check it immediately for any external
damage.
y
If you detect any damage, proceed as directed in the Care and
Maintenance chapter.
y
Save all parts of the original packaging for any future transportation.
During shipment, please do not leave cables plugged in!
The following parts are included in the equipment supplied:
Components Balance with Draft Shield Precision Balances
Readability: 0.1 mg 1 mg
Draft shield
Weighing pan: d 90 mm
Weighing pan: d 120 mm –
Weighing pan: d 180 mm –
Pan support
Shield disk –
Pan draft shield (Secura only)
AC adaptor with
country-specific power plug
In-use cover
Dust cover
Installation and Operating
Instructions
Application guide

Installing the Balance

Secura Models: Balance with Draft Shield
t
Install the following parts in the order
listed:
– In-use dust cover
– Turn the draft shield lock to
"unlocked
– Put the draft shield (1) on the
balance. Note: Use both hands to
hold the top struts of the draft shield.
– Move the side doors right to the back.
– Turn the draft shield lock to "locked
– Put the shield disk (2), centering ring*
(3), pan support (4), and weighing
pan (5) and draft ring* (6) on the
balance.
Modelle Quintix und Practum:
Note: For information about how to
clean the draft shield, see the Care
and Maintenance chapter on page 8.
* = for models with 0.1 mg readability
only
10 mg, 0.1 g, and 1 g
–
– –
–
–
–
– –
–
."
."