Intended Use - Sartorius YDK01 Betriebsanleitung

YDK01B, YDK01LP,
YDK01MS, YDK02MS:
Getting Started

Intended Use

– YDK01B for models Sartorius BSA124 S/-CW,
BSA224S/-CW, Acculab ATL-224/-I, ATL-124/-I,
ATL-84/-I
– YDK01LP for LA/LP balances with 1 mg
readability, ED224S, ED124S, LE324S, LE244S,
S/SI models
– YDK01MS for models of the Cubis series
– YDK02MS for Cubis series models with a readability
of 1 mg
Q Use in legal metrology: YDK01B, YDK01LP,
YDK01MS and YDK02MS may not be used in legal
metrology.
Installing the density determination
kit:
§ Remove the glass cover, weighing pan and pan
support (if required) from the balance
YDK01B, YDK01MS and YDK01LP for models
ED224S, ED124S, LE324S, LE244S:
§ Screw the adapter (8) onto the frame
§ Place the frame on the balance
$ The wedge-shaped opening at the top of the frame
must face in the direction from which the sample
holder (sieve/glass plummet) will be placed into the
frame.
YDK02MS:
§ Place the frame on the pan support
$ The wedge-shaped opening at the top of the frame
must face in the direction from which the sample
holder (sieve/glass plummet) will be placed into the
frame.
9