H) Modifying The Steering Direction - Reely Ice Tiger Bedienungsanleitung

h) Modifying the steering directions
Your remote control is tuned ex works exactly to your double rotor electric powered helicopter.
However, if during trimming, you notice that your model helicopter, with individual steering functions, responds contrary
to the pattern illustrated in figure 7, then you can switch over at the transmitter, for each individual steering function, the
direction of the response of the model.
For this purpose, there are four reverse switches on the front of the transmitter (see ill. 1, pos.6). The switches are
assigned the following functions:
Switch Function
1 Tail Function
2 Pitch Function
3 Nod function
4 Roll Function
To switch over a steering function, first disconnect the flight battery in the helicopter, then switch off the transmitter and
push the corresponding reverse switch in the other switch position.
Now you can switch on the transmitter again, connect the flight battery and check the correct function direction at the
helicopter.
Switch position
NOR
REV
NOR
NOR
Figure 13
51