Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service; Great Britain - Bosch GRL Professional 500 H Originalbetriebsanleitung

Problem
Batteries of measuring tool and/or laser receiver are not be-
ing charged.
The battery of the laser receiver became empty while the
measuring tool and laser receiver were switched on.
The laser receiver is defective, freezes or has been lost, and
the theft alarm is triggered.
A temporary software malfunction is occurring on the laser
receiver.

Maintenance and Service

Maintenance and Cleaning

– Keep the rotational laser level, battery charger and laser
receiver clean at all times.
– Do not immerse the rotational laser level, battery charger
and laser receiver into water or other fluids.
– Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
– Particularly clean the surfaces at the outlet opening of the
rotational laser level regularly and pay attention for any
lint.

After-sales Service and Application Service

In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the rotational laser level, battery charger and laser receiver.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
Corrective Measure
– Wait until the measuring tool and/or the laser receiver reach
(return to) the optimum charging temperature range
(0 °C ...+40 °C).
– Press the reset button 13.
Measuring tool is switched off.
– Press the reset button 13.
The audio signal and the measuring tool are switched off.
– To reset the laser receiver to the delivery condition,
simultaneously press the On/Off button 17 and the
measuring accuracy setting button 23.
The default settings for measuring accuracy (medi-
um), display illumination (activated), unit display
(mm) and audio signal (normal) will be restored.

Ireland

Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au

Republic of South Africa

Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
English | 47
2 610 031 676 | (15.7.14)