Laser Receiver Lr 50; Product Features - Bosch GRL Professional 500 H Originalbetriebsanleitung

Laser Receiver LR 50

The laser receiver is designed to quickly locate rotating laser
beams and to remote-control the rotational laser level.
The laser receiver is suitable for indoor and outdoor use.
Note: The LR 50 functions both as a laser receiver and as a re-
mote control. To make descriptions and instructions easier to
read, the LR 50 is referred to only as a "laser receiver" in the
following text.

Product Features

The numbering of the product features refers to the illustra-
tion of the rotational laser level, battery charger and laser re-
ceiver on the graphics page.
Rotational Laser Level
1 Plumb beam (GRL 500 HV)
2 Laser beam outlet
3 Prism cover (aluminium, glass)
4 Theft alarm LED
5 Charge contacts for laser receiver
6 Charging/storage station for laser receiver
7 Laser beam
8 Laser warning label
9 Serial number of the rotational laser level
10 Tripod mount 5/8" (vertical) (GRL 500 HV)
11 Charge socket cover
12 Tripod mount 5/8" (horizontal)
13 Reset button
14 Socket for charge connector
Laser Receiver
15 Display
16 Centre mark
17 On/Off button
18 Slope button, up
19 Centre line mode button
20 Slope button, down
21 Sleep mode button
22 Theft alarm button
23 Button for selecting the measuring accuracy
24 Audio signal/volume button
25 Calibration button
26 Reception area for the laser beam
27 Serial number of laser receiver
28 Charge contacts
Indicator elements of laser receiver
29 Battery charge-control indicator for rotational laser level
30 Battery charge-control indicator for laser receiver
31 Text display for slope/error
32 Text display for relative height/calibration interval
33 RF communication indicator
34 Out-of-temperature-range indicator
35 Calibration interval indicator
36 Theft alarm indicator
Bosch Power Tools
37 Out-of-level indicator
38 Shock-warning indicator
39 Direction indicator "move upward"
40 Direction indicator "move downward"
41 Slope mode indicator
42 Centre line mode indicator
43 Centre line indicator
44 Sleep mode indicator
45 Indicator for audio signal/volume
46 Indicator for measuring accuracy "Fine"
47 Indicator for measuring accuracy "Medium"
48 Indicator for measuring accuracy "Coarse"
Charger
49 Battery charger
50 Charge connector
51 Connector plug
52 Power plug
Accessories/Spare parts
53 Measuring rod clamp
54 Locking screw for measuring rod clamp
55 Construction laser measuring rod*
56 Fastening screw for measuring rod clamp
57 Spirit level of measuring rod clamp
58 Slot for laser receiver
59 Wall mount/alignment unit*
60 Fastening screw of the wall mount*
61 Screw of the alignment unit*
62 5/8" screw on wall mount*
63 Tripod*
64 Laser viewing glasses*
65 Case
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
English | 33
2 610 031 676 | (15.7.14)