Specifications - Hitachi CS 36DL Bedienungsanleitung

CAUTION
1. If liquid leaking from the battery gets into your eyes, do not
rub your eyes and wash them well with fresh clean water
such as tap water and contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well with
clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you fi nd rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using the
battery for the fi rst time, do not use and return it to your
supplier or vendor.
DESCRIPTION OF NUMBERED ITEMS (Fig. 2-Fig. 48)
36 V Rechargeable
1
battery
2 Latch
3 Ventilation holes
4 Terminals
5 Battery cover
6 Insert
7 Pull out
Rear handle (Top
8 handle)
9 Pilot lamp
0 Line
! Knob
@ Tension dial
# Side cover
$ Saw chain
% Guide bar

SPECIFICATIONS

POWER TOOL
Model
Saw chain
Guide bar
Sprocket
No-load chain speed
Chain oil tank capacity
LED light
Level indicator
Battery
Weight*
* Weight: According to EPTA-Procedure 01/2003
^ Guide bar tip
& Sprocket
* Blade direction
( Bolt
) Bolt hole
q Increase the tension
w Decrease the tension
e Drive link
r Fasten
t Chain brake
y Pull
u Chain oil
i Light switch
o Oil sight glass
p Oil pump adjuster
WARNING
If an electrically conductive foreign object enters the
terminals of the lithium ion battery, a short-circuit may
occur resulting in the risk of fi re. Please observe the
following matters when storing the battery.
○ Do not place electrically conductive cuttings,
nails, steel wire, copper wire or other wire in the
storage case.
○ Either install the battery in the power tool or store
by securely pressing into the battery cover until
the ventilation holes are concealed to prevent
short-circuits (See Fig. 3).
a Lock-off button
s Switch
Battery level indicator
d
switch
f Battery level indicator
g Hook
h Actuation
j Release
k Spike
Rear handle (Top
l handle)
; Front handle
z Round fi le
x 1/5 of diameter of fi le
c Depth gage jointer
v Flat fi le
Protruding depth gage
b head
CS36DL
Type: 91PX-45XJ
Pitch: 9.5 mm (3/8") / Gage: 1.3 mm (0.05")
Type: P012-50CR
Size: 300 mm (Max. cutting legth)
Number of teeth: 6 / 9.5 mm (3/8")
8.3 m/s (500 m/min)
80 ml
White LED
Red LED
BSL3620: Li-ion 36 V (2.0 Ah, 10 cells)
4.4 kg (With BSL3620 attached)
9
English
n Round off
m Brake band chamber
, Chain oil spout
. Groove
/ Oil hole
¡ Wear limit
™ Nail of carbon brush
Protrusion of carbon
£
brush
¢ Brush cap
Contact portion of
∞
brush tube
§ Chain tensioner hole
¶ Chain tensioner boss
• Hexagonal bar wrench