Technical Data - VOLTCRAFT SPEED EX15 Pro Bedienungsanleitung

Periodically check the technical safety of the device and the connection cables, e.g.
for damage to the housing or squeezing etc.
Always observe the following safety instructions before cleaning the device:
Live components may be exposed if covers are opened or parts are
removed unless this can be done by hand.
All connected lines must be disconnected from the instrument before
servicing or repair work (fuse replacement) is performed.
Repair work must only be carried out by specialists familiar with the
hazards involved and with the relevant regulations.

Technical data

Operating voltage AC ................ 230V~ 50 Hz
Operating voltage DC ................ 11.5 - 13.5 V (7 A min.)
Power consumption .................. 100 W
Charging voltage ........................ max. 30 V DC
Charge current............................ 100 mA or 0.5 - 5.5 A
Discharge current ...................... 2A or 20A
Number of cells .......................... 1 - 15 (Ni-Cd/Ni-MH)
Fuse............................................ FCF 25 A, colour-coded, white
Charge control ............................ optic and acoustic
Operating conditions .................. 0 to +30°C,
Dimensions (W x H x D).............. approx. 127 x 75 x 158 mm
Weight:........................................ Approximately 750 g
The stated discharge currents vary depending on the accumulator
voltage. You can check the current value on the display function
„Ampere".
26
2 - 3 (Li-Ion/Li-Polymer)
rel. air humidity < 75%, non-condensing