F) Basic Information Relevant To The Control Of Model Helicopters - Reely MSP190 Bedienungsanleitung

f) Basic Information Relevant to the Control of Model Helicopters

Before you fly your model, you should first familiarise yourself with the control possibilities open to you and thereby
be able to fly safely. The indoor helicopter is controlled with the aid of the two levers on the transmitter. The following
functions are available:
Pitch Function
With the pitch function you can control the flying height of the helicopter (see figure 10). The left control stick (also see
figure 1, item 8) is used for control. To that effect, the control stick can be moved forward and backward. Unlike the
other control functions, the lever does not keep springing back to the centre position.
Because the angle of attack of the rotor blades cannot be changed, the flying height is adjusted by speed changes of
the main rotor. Pulling the control stick fully towards you switches off the engine and the rotor stops.
If you push the control stick forward, the main rotor runs and increases the speed according to the position of the lever.
Once the control stick is in the centre position, the main rotor speed should be high enough for the helicopter to hover.
Parallel to the main rotor, the tail rotor speed is automatically controlled by a percentage.
Figure 10
43