D) Switching On The Helicopter; E) Basic Information On Controlling Model Helicopters - Reely 2115097 Bedienungsanleitung

d) Switching on the helicopter

To operate the helicopter, make sure that the batteries in the transmitter have suf cient remaining capacity and the
helicopter rechargeable battery in the model is charged.
Move the joystick for the pitch function (see Fig. 1, no. 8)
to the lowest position and press the on/off button (see Fig.
1, no. 2). The red LED on the transmitter will ash slowly.
Then slide the model helicopter on/off switch (see Fig.
4 above) from the OFF position to the ON position. The
front-facing LED of the model helicopter will go on.
Then place the helicopter on a at start surface. The heli-
copter tail should point to you.
Now move the joystick for the pitch function (see Fig. 1,
no. 8) all the way up and back to the lowest position. The
transmitter LED will now glow steadily.
The helicopter is now ready to start.
Important!
Read the following information carefully before ying the helicopter.

e) Basic information on controlling model helicopters

Before you y your model, you should rst familiarise yourself with the control possibilities in order to operate it safely.
The indoor helicopter is controlled with the aid of the two control sticks on the transmitter. The following functions are
available:
Figure 8
35