11. Control of the model airplane
Before starting your model for the first time, you need to familiarise yourself with the control functions.
After switching on and activating the motor function, the model will be controlled with the two control levers at the
transmitter. The control lever for the motor function (see figure 6, item 6) controls the shared rotating speed of both
electrical motors. The farther the control lever is pushed forward, the faster will the two motors run and the stronger
will the model's thrust be accordingly.
Figure 9
At maximum speed, the model will rise up at a flat angle
(see figure 10, sketch A).
At a reduced speed, the model will fly at a stable altitude
(see figure 10, sketch B).
At a low speed, the model will reduce its altitude (see fig-
ure 10, sketch C).
Figure 10
38