Ethernet Interface (X27); Figure 28: Ethernet Interface X27; Table 21: Ethernet Interface X27 - Phytec phyCORE-Z500PT Hardware Bedienungsanleitung

11.15 Ethernet Interface (X27)

Connector X27 provides a connection to the 1-GB/s Ethernet interface of the Intel 82574 Ethernet
controller on the phyCORE-Z500P(T). Table 21 below shows the signal mapping of the signals to
connector X27.
LED1 (green) acts as the link status LED and LED2 as traffic.
Table 21: Ethernet interface X27

Figure 28: Ethernet Interface X27

© PHYTEC Messtechnik GmbH 2009
Pin Signal
J1 MDI_CS0P
J2 MDI_CS0N
J3 MDI_CS1P
J4 MDI_CS1N
J5 MDI_CS2P
J6 MDI_CS2N
J7 MDI_CS3P
J8 MDI_CS3N
L-732e_0
The phyCORE-Z500P(T) on the Carrirer Board
67