Table 8: Carrier Board Jumper Descriptions - Phytec phyCORE-Z500PT Hardware Bedienungsanleitung

Table 8: Carrier Board jumper descriptions
JUMPER SETTING
JP1
Open
Closed
JP2
Open
Closed
JP3
Open
Closed
J10
Open
closed
1
Default settings are in
© PHYTEC Messtechnik GmbH 2009
DESCRIPTION
BIOS Bank 0 is selected
BIOS Bank 1 is selected (if available)
BIOS on phyCORE-Z500P(T) is enabled
BIOS on phyCORE-Z500P(T) is disabled
On-Board Power is switched by Power Management
On Board Power is forced on
SDD is Master / SATA is Slave
SATA is Master / SDD is Slave
bold blue text
L-732e_0
The phyCORE-Z500P(T) on the Carrirer Board
1
SEE
SECTION
47