Inhaltsverzeichnis
Werbung
4
Power Requirements
The phyCORE-Z500PT normally operates off a single voltage supply denoted as VCC5VA.
Table 3:
Power supply
power supply
5 V (VCC5VA)
The input voltage range of VCC5VA is from 4.5 V.. 5.5 V allowing a current draw of typically 700 mA.
See Table 1 from section 2 above for applicable VCC5VA power pins on the phyCORE-connector.
Caution!
Connect all VCC5VA input pins to your power supplies.
As a general design rule we recommend connecting all GND pins neighboring signals which are being used
in the application circuitry.
© PHYTEC Messtechnik GmbH 2009
min.
4.5 V
L-732e_0
Power Requirements
typ.
max.
5 V
5.5 V
19
Werbung
Inhaltsverzeichnis
