The Phycore Z500P(T) On The Carrier Board; 11.1 Connectors; Table 7: Carrier Board Connectors - Phytec phyCORE-Z500PT Hardware Bedienungsanleitung

11

The phyCORE Z500P(T) on the Carrier Board

PHYTEC Carrier Boards are fully equipped with all mechanical and electrical components necessary
for the speedy and secure start-up and subsequent communication to and programming of applicable
PHYTEC Single Board Computer (SBC) modules. Carrier Boards are designed for evaluation, testing
and prototyping of PHYTEC Single Board Computers in laboratory environments prior to their use in
customer designed applications.

11.1 Connectors

Table 7 lists all available connectors on the phyCORE-Z500P(T) Carrier Board. Figure 8:
Carrier Board connector location" highlights the location of each connector for easy
identification.
Table 7: Carrier Board connectors
REFERENCE
DESIGNATOR
X1 Module connector, Samtec QTH-120-02-L-D-A
X4 JTAG-Port for PCIe Switch
X5 USB Port 3
X6 PCIe Slot 0
X7 PCIe Slot 1
X8 miniPCIe Slot 0
X9 SATA connector
X10 FPGA JTAG-Port
X11 HSMA JTAG-Port
X12 JTAG-Port for baseboard PLD
X14 RS232 header
X15 Header for front panel
X16 GPS external antenna connector
X17 Bluetooth external antenna connector
X18 Sim card holder
X19 Header for audio signals
X20 CD audio connector
X21 touch connector
X22 LPT printer
X23 RS232 (COM1)
X24 PS/2 keyboard/mouse
X25 DVI (only digital)
X26 miniUSB (OTG)
X27 Ethernet/2 x USB
© PHYTEC Messtechnik GmbH 2009
The phyCORE-Z500P(T) on the Carrirer Board
DESCRIPTION
L-732e_0
41