Time And Date - eQ-3 homematic IP HmIP-eTRV-CL Montage- Und Bedienungsanleitung

Configuration menu
6.4 Programming a heating schedule
In this menu item, you can create a heating schedule with heating and
cooling phases according to your personal needs.
Press and hold the menu button (D) for approx. 2 seconds to
•
open the configuration menu.
• Select "PRG" using the plus and minus buttons (C + E) and con-
firm with the menu button.
• Under the menu item "DAY", use the plus and minus buttons to
select individual weekdays, all weekdays, the weekend or the en-
tire week for your heating schedule and confirm with the menu
button.
• Confirm the start time 00:00 hours with the menu button.
• Select the desired temperature and start time using the plus and
minus buttons and confirm with the menu button.
• The next time is shown in the display. You can adjust this time
using the plus and minus buttons.
• Select the desired temperature for the next time period using the
plus and minus buttons and confirm with the menu button.
• Repeat this procedure until temperatures are stored for the entire
period between 0:00 and 23:59 h.
To confirm, the time flashes twice, and the device changes back to the
standard display.
6.5

Time and date

To set the date and time, please proceed as follows:
Press and hold the menu button (D) for approx. 2 seconds to
•
open the configuration menu.
Select "DATE/TIME" using the plus and minus buttons (C + E).
•
• Confirm with the menu button.
• Select the desired year using the plus and minus buttons and
confirm with the menu button.
• Select the desired month using the plus and minus buttons and
confirm with the menu button.
56