Setting The Date And Time - eQ-3 L Bedienungsanleitung

If batteries are inserted or replaced, the date and time is
automatically requested after a brief display of the firmwa-
re version number.
• Set the year, month, day, hour and minute (F) with the
selector dial (D) and confirm with OK (I).
D
The motor moves the control pin backwards during the set-
ting of the date and time.
• The display of „INS" with the rotating „∏" shows that the
motor is still travelling back. When only „INS" is shown
in the display, the actuator can be installed on the valve.
• The weekly program and other settings can be ad-
justed before installation. Press the Menu key for this,
while „INS" is shown in the display. You can find more
details under „10. Configuration menu".
• After the programming has been completed, „INS" is
shown again in the display and installation can take place.
32 32

5. Setting the date and time

F
I