Basic Settings; Changing Basic Settings; Proficlean-Set; Memory Function - Schulthess Spirit industrial wmi 220 Bedienungsanleitung

B AS I C S ET TI N GS
The machine has basic settings from the factory. The
settings can be adapted to your individual requirements
at operation start-up or later.

Changing basic settings

Basic settings may only be changed if no washing pro-
gramme is running.
 Press the programme button «M» for at least three
seconds.
The basic settings are shown on the display:

BASIC SETTINGS

PROFICLEAN SET: HOMES
 To return to the previous function, press the cursor
key «Left» .
 To go to the next function, press the cursor key
«Right» .
 To change the set values, use the cursor key «Up»
and «Down» .
PROFICLEAN-SET (ex factory HOMES)
You set with this which of the five profiClean-Programme
groups with the programme numbers «1» to «30» can be
retrieved:
 GASTRONOMY
 HOMES
 COMMERCIAL COMPANY
 FACILITY CLEANER
 FIRE BRIGADE
 HOSPITAL
 CUSTOMER SPECIFIC
CAUTION
The programmes at the programme places «1» to «12»
are overwritten by the selection of a new programme
group.
MEMORY-FUNCTION (ex factory 0: NO)
 0: NO
The function is not activated.
 1: YES
The memory function stores the number of retrievals
per programme. If the button of programme group («P»,
«S», «D» or «Wet-Clean») is pressed, the most frequently
retrieved programme of the group in question is
displayed.
If you press the button several times, the other pro-
grammes are displayed one after another.
 2: RESET
The counter is set to zero with this setting.
LOOSENING UP AT PROGRAMME END (ex factory 1: YES)
 0: NO
The function is not activated.
 1: YES
Loosening the laundry at the programme end only takes
place if module M07 (loosening) is set at the end of the
selected washing programme.
RINSING STOP (ex factory 0: NO)
 0: NO
The function is not activated.
 1: YES
The laundry remains in the last rinsing water.
The «RINSING STOP» message is shown on the display.
 After a rinsing stop, the programme can optionally be
ended with or without spinning.

AUTOMATIC DOOR OPENING AT PROGRAMME END

(ex factory 0: NO)
 0: NO
The door remains locked at the end of the washing
programme.
 Open and lock the door by pressing the button «Open
door».
 1: YES
The door is unlocked automatically at the end of the
washing programme. If there is loosening at the
programme end, the door is only unlocked afterward.
LCD BRIGHTNESS (ex factory 75 %)
The brightness of the display can be set between 0 %
and 100 %.
LCD CONTRAST (ex factory 55 %)
The contrast of the display can be set between 40 %
and 100 %.
ALARM VOLUME (ex factory VOLUME 3)
The volume of the buzzer can be varied on three levels
or switched off completely:
 OFF
 VOLUME 1
 VOLUME 2
 VOLUME 3
55
B ASIC SET TINGS