Adding the detergent
Fill the detergent into the corresponding cups
according to the information in the «Programme over-
view» table.
Observe the washing instructions and the information
for detergent filling in the «Machine Description» chap-
ter.
Use the disinfectants lists for the disinfection pro-
gramme.
Wet-Cleaning
Only use detergents and auxiliary agents special for
wet-cleaning for the Wet-Clean programmes.
Starting / interrupting the programme
Press the start button to start the programme.
Also press the start button to interrupt a running
programme.
Programme time / programme status
40°C COLOUREDS
PROGRAMME N0. 111
While a washing programme is running, the name, number
and remaining time of the programme as well as the
currently performed programme step are displayed.
Abort programme
To cancel a running programme, press the program-
ming button «E» and the deletion button «C» at the
same time.
Refill detergent when you restart the programme.
The disinfection and autoClean programmes cannot be
aborted.
Ending the programme with rinsing stop
The additional function «Rinsing stop» is selected.
The laundry is in the last rinsing water. The message
«RINSING STOP» is displayed.
There are two options for ending the programme:
Remove spun laundry
Press the start button.
The rinsing water drains, and the laundry is spun.
Remove dripping-wet laundry
a) «Step function» activated (Machine configuration
D13):
Keep the programming button «A» pressed down.
Press the cursor button «Right»
the message «PROGRAMME END / PLEASE OPEN DOOR»
is displayed
b) «Step function» not activated:
Interrupt the programme by pressing the program-
ming button «E» and the deletion button «C»at the
same time. The rising water drains.
In disinfection and autoClean programmes, the step and
abort functions are not available.
52
WASHING / AD D ITIO NAL F UNCTIONS
Programme end
Removing the laundry
Switching off the machine
00:40
WASH
Gentle programme for easy care fabrics
Pre-wash
several times until
Reducing the temperature
The end of the washing programme is indicated by an
acoustic signal, and the message «PROGRAMME END /
PLEASE OPEN DOOR» is displayed.
Press the button «Open door» to unlock the door.
The message «PLEASE REMOVE LAUNDRY» is displayed.
Open the door by pulling it, and remove the laundry.
Clean the rubber seal on the inside of the door.
Remove any foreign objects (e. g., paper clips) from
the drum to prevent rust.
Notice
Leave the door open or opened by a crack after
washing, so that the washing machine can dry.
Switch off the main switch after finishing.
Close the water stop-valve.
AD D I T I O NA L F U N CT I O NS
By selecting one or more additional functions, you can
tailor your wash programme to the specifics of your
laundry.
For easy care and particularly sensitive fabrics made of
cotton, mixed fibres, synthetics.
Suitable for extremely soiled laundry, stubborn stains
and work clothes (e.g., blood or stains containing protein,
diapers).
The wash temperature is 35 °C.
Use ¼ of the detergent quantity for pre-washing.
Fill the detergent in cup 1.
Notice
Pre-washing can also be selected for the following
programmes:
Np. 111, 112, 113, 117, 118, 119 (cf. programme overview)
The washing temperature can be reduced step-by-step
when you press this button several times..
In disinfection and autoClean programmes, the temper-
ature reduction function is not available.