Z Spin Speed; Z Rinsing Stop; Z Quick Wash; Z Additional Rinse - Schulthess Spirit eMotion 7010 Bedienungsanleitung

Basic Settings
The machine has basic settings from the factory. It can
be adapted to the user›s individual needs either when
first used or later using the following functions.
The basic settings can only be changed if no wash pro-
gramme is running. To change a basic setting, it is first
necessary to hold the programme button pressed and
then press the quick wash button. The corresponding
function is shown on the digital display. The display
changes when the quick wash button is pressed repeat-
edly with the programme button held down.
Example:
Additional rinse (ex factory OFF))
+
To improve the rinse results in soft water areas or for
allergy sufferers, switch on the extra rinse.
Water level during wash (ex factory NORMAL)
+
If the function is set to «Increased», the water level is
higher during washing.
Water level during rinse (ex factory NORMAL)
+
If the function is set to «Increased», the water level is
higher during rinsing.
Spin speed reduction (ex factory OFF)
+
Wash programmes
Boil / Coloured wash
Easy care wash
Delicate wash
Wool
Special programmes
Function switched off
Function switched on
Spin speed in rpm
Off 1. Reduced 2. Reduced
level level
1400 1200 1000
800 800 600
600 600 400
800 600 400
600 600 400
44
Time (the clock is not set ex factory)
+
The hours can be set using the
minutes using the
Language (ex factory DEUTSCH)
+
This setting is temporarily valid for the selected pro-
gramme and reverts back to the default language a few
minutes after completion of the programme.
(See «Extended basic settings/Default language»)

Extended basic settings

+
X By pressing these three buttons at the same time, the
display shows the extended basic settings.
X Repeatedly pressing the
settings.
X Pressing the
changed.
X Pressing the
settings.
Skincare function (ex factory OFF)
Select «Extended basic settings»!
If the skincare function is switched on, two extra rinses
are added to each wash programme. These additional
rinses can prevent skin allergies.
Child lock (ex factory OFF)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing
or deletion of a programme by small children.
Operating the machine with the child lock switched on:
+
Hold the Start button down and press the quick wash
button.
Rinsing stop (ex factory INDIVIDUAL)
Select «Extended basic settings»!
If this function is set to «General», all easy care or deli-
cates programmes automatically add a rinsing stop.
button and the
button.
÷
+
button shows the possible
button allows the settings to be
button interrupts the display of the