Standby Function; Time; Date; Programme Duration - Schulthess Spirit industrial wmi 220 Bedienungsanleitung

STANDBY FUNCTION (ex factory 1: STANDBY)
The two different energy-saving levels of the appliance
can be used individually or in combination:
 0: OFF
The appliance always remains switched on.
 1: STANDBY
After five minutes, the appliance switches automatically
into «STANDBY» mode if no programme is active.
Date and current time are shown on the display.
The background lighting is dimmed.
 2: OFF-MODE
After ten minutes, the appliance switches automatically
into «OFF MODE» if no programme is active.
The display is dark..
Wake appliance
 Press any button.

TIME

You can control set the time using this function.
 You can switch between «Hours» and «Minutes» us-
ing the cursor keys «Left» and «Right»
 You can change the set values using the cursor keys
«Up» and «Down»

DATE

You can control set the date using this function.
(Format: year, month, day
 You can switch between «Year», «Month» and «Day»
using the cursor keys «Left» and «Right»
 You can change the set values using the cursor keys
«Up» and «Down»

PROGRAMME DURATION

(ex factory 1: DISPLAY PROG. LENGTH)
 1: DISPLAY PROG. LENGTH
The time displayed shows the remaining time of the
washing programme.
 2: PRG END TIME
The time displayed shows the end of the washing
programme.
CLEANING DISPLAY (ex factory 0: NO)
 0: NO
The function is not activated.
 1: 100
 2: 250
 ...
 8: 2000
This setting defines after how many wash cycles the
message «CLEAN MACHINE» is to be displayed.
 Clean immediately if possible by starting the mainte-
nance programme «autoClean» (No. 201).
56
B ASI C SET T ING S
.
.
.
.
If necessary, you can start the programme up to 10
more times before cleaning. The message is displayed
again at the end of each washing.
At the end of the tenth washing, the message «CLEAN
NOW» is displayed. Cleaning is then mandatory: Except
for the «autoClean» programme, no other programme
can be started.
 The cleaning message can only be acknowledged by
starting the «autoClean» programme.
AUTO. DAYLIGHT SAVING TIME
(ex factory 1: YES)
 0: NO
The function is not activated.
 1: YES
The time will automatically be set forward one hour
during summer time.