Z Additional Rinse; Z Water Level During Wash; Z Water Level During Rinse; Z Spin Speed Reduction - Schulthess Spirit topLine 8040i Bedienungsanleitung

Basic Settings
The machine has basic settings from the factory. It can
be adapted to the user›s individual needs either when
first used or later using the following functions.
The basic settings can only be changed if no wash pro-
gramme is running. To change a basic setting, it is first
necessary to hold the programme button pressed and
then press the quick wash button. The correspond-
ing function is shown on the digital display. The display
changes when the quick wash button is pressed repeat-
edly with the programme button held down.
The basic settings on your machine may be blocked.
However, the time setting and language selection func-
tions are available.
Example:
Additional rinse (ex factory OFF)
+
To improve the rinse results in soft water areas or for
allergy sufferers, switch on the extra rinse.
Water level during wash (ex factory NORMAL)
+
If the function is set to «increased», the water level is
higher during washing.
Water level during rinse (ex factory NORMAL)
+
If the function is set to «increased», the water level is
higher during rinsing.
Spin speed reduction (ex factory OFF)
+
46
Function switched off
Function switched on
Wash programmes
Boil / Coloured wash
Easy care wash
Delicate wash
Wool
Special programmes
Time (the clock is not set ex factory)
+
The hours can be set using the
minutes using the
Language (ex factory DEUTSCH)
To change language press the select-language button or
press
÷
+
This setting is temporarily valid for the selected pro-
gramme and reverts back to the default language a few
minutes after completion of the programme.
(See «Extended basic settings/Default language»)

Extended basic settings

+
X By pressing these three buttons at the same time, the
display shows the extended basic settings.
X Repeatedly pressing the
settings.
X Pressing the
changed.
X Pressing the button interrupts the display of the
settings.
Skincare function (ex factory OFF)
Select «Extended basic settings»!
If the skincare function is switched on, two extra rinses
are added to each wash programme. These additional
rinses can prevent skin allergies.
Child lock (ex factory OFF)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing
or deletion of a programme by small children.
Operating the machine with the child lock switched on:
+
Hold the Start button down and press the Quick Wash
button.
Spin speed in rpm
Off 1. Reduced 2. Reduced
level
1600 1200 1000
800 800
600 600
800 600
600 600
button and the
button.
+
button shows the possible
button allows the settings to be
level
600
400
400
400