Activating/Deactivating The "Dual Time Mode" Function; Activate Or Deactivate B-Braking Stages; Activating Or Deactivating Start-Up And Run-Down Times - Hettich ROTANTA 460 Bedienungsanleitung

EN
22

Activating/deactivating the "Dual time mode" function"

The "Dual time mode" function can be activated and deactivated as follows when the rotor is at a standstill:
You can scroll backwards through the menu by pressing the
The operation can be cancelled at any time by pressing the
stored.

Keep the key held down for 8 seconds.
PROG
After 8 seconds,  Machine Menu  appears in the display.

Press the key as often as necessary until the ->Settings is displayed.
PROG

Press the key. The SOUND / BELL = off/on is displayed.
START

Press the key until Dual time mode enabled/disabled is displayed.
PROG

Use the knob to set enabled or disabled.
disabled = The function is deactivated,
enabled = The function is activated.

Press the key to save the setting.
START
Briefly, Store Settings ... is displayed as confirmation, followed by -> Settings.

Press the key once to leave the "Settings" menu or press the
OPEN / STOP
"Machine Menu.
23

Activate or deactivate B-braking stages

The B-braking stages can be activated or deactivated as follows when the rotor is at a standstill.
You can scroll backwards through the menu by pressing the
The operation can be cancelled at any time by pressing the
stored.

Keep the key held down for 8 seconds.
PROG
After 8 seconds,  Machine Menu  appears in the display.

Press the key as often as necessary until the ->Settings is displayed.
PROG

Press the key. The SOUND / BELL = off/on is displayed.
START

Press the key as often as is required until B-Ramp = off/on is displayed.
PROG

Use the adjusting knob to set
off = B-braking stages are deactivated,
on = B-braking stages are activated.

Press the key to save the setting.
START
Briefly, Store Settings .. is displayed as confirmation, followed by -> Settings.

Press the key once to leave the "Settings" menu or press the
OPEN / STOP
"Machine Menu.
24

Activating or deactivating start-up and run-down times

The start-up and run-down times can be activated or deactivated as follows with the rotor at a standstill:
You can scroll backwards through the menu by pressing the
The operation can be cancelled at any time by pressing the
stored.

Keep the key held down for 8 seconds.
PROG
After 8 seconds,  Machine Menu  appears in the display.

Press the key as often as necessary until the ->Settings is displayed.
PROG

Press the key. The SOUND / BELL = off/on is displayed.
START

Press the key as often as is required until Ramp Unit = Steps / Steps / Time is displayed.
PROG

Use the adjusting knob to set
Steps = start-up and run-down times deactivated,
Steps / Time = start-up and run-down times activated.

Press the key to save the setting.
START
Briefly, Store Settings .. is displayed as confirmation, followed by -> Settings.

Press the key once to leave the "Settings" menu or press the
OPEN / STOP
"Machine Menu.
74/203
off or on.
Steps or Steps / Time.
key.
T/°C
key. In this case, the settings are not
OPEN / STOP
key twice to leave the
OPEN / STOP
key.
T/°C
key. In this case, the settings are not
OPEN / STOP
key twice to leave the
OPEN / STOP
key.
T/°C
key. In this case, the settings are not
OPEN / STOP
key twice to leave the
OPEN / STOP