Symbol Meanings; Delivery Checklist; Unpacking The Centrifuge - Hettich ROTANTA 460 Bedienungsanleitung

EN
5

Symbol meanings

Symbol on the device:
Attention, general hazard area.
Before using the device, make sure you read the operating instructions and observe the safety
information!
Symbol in this document:
Attention, general hazard area.
This symbol refers to safety relevant warnings and indicates possibly dangerous situations.
The non-adherence to these warnings can lead to material damage and injury to personal.
Symbol on the device and in this document:
Beware of hot surface.
Nonobservance of this warning can lead to material damage and personal injury.
Symbol on the device and in this document:
Beware of biohazard.
Symbol on the device:
Equipotential: Connector (PE connector) for potential equalization (only for centrifuge with PE
connector).
Symbol on the device:
IOIOI
RS232 RS232 interface (only for device with RS232 interface).
Symbol on the device:
Automatic circuit breaker (only in centrifuges with a circuit breaker).
F2
Symbol in this document:
This symbol refers to important circumstances.
Symbol on the device and in this document:
Symbol for the separate collection of electric and electronic devices according to the guideline
2002/96/EG (WEEE). The device belongs to Group 8 (medical devices).
Applies in the countries of the European Union, as well as in Norway and Switzerland.
6

Delivery checklist

1 Connecting cable
1 Hex. pin driver 2,5 mm
1 Hex. pin driver 5 mm
1 Lubricating grease for trunnions
1 Operating instructions
1 Notes on moving the equipment safely
The rotor(s) and associated accessories are included in the delivery in the quantity ordered.
7

Unpacking the centrifuge


Lift the carton upward and remove the padding.

Do not lift by the front panel.
Observe the weight of the centrifuge, refer to chapter "Technical specifications".
ROTANTA 460 / 460 R:
Lift the centrifuge on both sides with an appropriate number of helpers and place it on the laboratory table.
ROTANTA 460 RC / ROTANTA 460 RF:
Unpack and install the centrifuge in accordance with the instruction leaflets AH5670XX or AH5675XX provided.
58/203