B) Checking The Drive - Reely X6 Bedienungsanleitung

Attention!
Do not connect the USB cable to a USB hub without a separate mains adapter (e.g. a keyboard USB port,
etc.), because these will not provide sufficient current for charging.
The operating system does not recognize any new hardware after connection, because the USB port is only
used for power supply. Please observe that the USB ports of your computer/notebook are usually only active
when the computer/notebook is switched on.
Therefore, we recommend to only connect the charging cable to a computer/notebook that is switched on.

b) Checking the Drive

Before commissioning your hexacopter, you need to check the drive. Only when all six propellers run smoothly and
perfectly round can the model fly with the lowest energy consumption. For this reason, you should check the drive
propeller function briefly before each flight.
For this, turn every single propeller carefully with your finger and check concentricity and smooth operation.
Observe the rotating directions of the different propellers. Three
propellers turn clockwise (A) and three propellers turn counter-
clockwise(B).
46
Figure 8