Switching Beginner/Expert Mode - Reely X6 Bedienungsanleitung

12.

Switching Beginner/Expert Mode

When you have mastered the hexacopter perfectly safely in the „BEGINNER" mode, you can activate the „EXPERT"
mode on the transmitter with a switch.
For this, push the slider „BEGINNER/EXPERT" (dual rate func-
tion) (also see figure 1, item 6) from the position „BEGINNER"
to the position „EXPERT" with the remote control off.
Start up the transmitter and then the model.
The reactions of the model to the control movements at the
transmitter will now be much more agile in expert mode than
in beginner mode.
In expert mode, the hexacopter is able to fly 360° loops called
„flips". For this, the control stick for the nod or roll function must
be briefly deflected to the stop and returned to the middle posi-
tion again in the right moment.
Figure 24
We recommend in any case that you perform the first flips at a
sufficient safety height. Thus, you are able to reliably catch your
model again with control corrections if your attempt fails.
60