Reely X6 Bedienungsanleitung Seite 52

To change the control stick movement from „MODE 2" to „MODE 1" or
vice versa at the transmitter, you need the following steps:
The transmitter is in the configuration „MODE 2". The left control stick
is used for controlling the pitch function (fig. A).
Fold the turning operating unit at the carry handle backwards by 90°
(fig. B).
Push the carry handle through the operating part to the front from the
back (fig. C).
Fold the operating unit farther back so that the carry handle is at the
top again (fig. D).
When you turn around the transmitter now, it will be configured auto-
matically for „MODE 1" according to its label. The right control stick is
used for controlling the pitch function now (fig. E).
Figure 16
52