Setting Up The Transmitter; Inserting The Batteries - Reely X6 Bedienungsanleitung

9.

Setting up the Transmitter

In the further course of these instructions, figures in the text always refer to the adjacent figure or the figures
within the section. References to other figures are indicated with the corresponding figure number.
a) Inserting the Batteries
The power supply of the transmitter requires 4 mignon/AA batteries (e.g. Conrad Item No.: 652504, please
order 1x).
Important:
Use batteries only (1.5 V/cell) instead of rechargeable batteries (1.2 V/cell) for transmitter power supply.
Proceed as follows to insert the batteries:
Lift the latching tab of the battery compartment lid (1) at the
bottom of the transmitter housing slightly and fold the battery
compartment lid open upwards.
Insert four mignon/AA batteries into the battery compartment
according to the indications at the bottom (2) in the correct po-
larity. The spiral-shaped spring contact always must be connec-
ted to the minus pole of the battery.
Fold down the battery compartment lid and let it latch.
42
Figure 3