13.2
Dismantling
Disconnect all electrical leads carefully.
Disconnect the fan from the supply terminals.
CARE
Risk from impacts and cutting!
»
Wear protective gloves when dismantling!
»
Dismantle carefully.
»
Handle heavy parts with care.
Remove the fi tting material carefully.
Remove the rotor and place it on the ground.
Loosen the screws holding the electric motor and place the motor on the ground.
14
Disposal
Both the device and the matching transport packaging comprise recycling-capable raw materials to a very great extent.
14.1
Disposing of the fan
If the fan is to be fi nally dismantled and disposed of, proceed as follows:
Switch the fan free of voltage.
Disconnect the fan from the supply connections.
Dismantle the fan into its component parts.
Separate the parts resulting from this according to
–
reusable components
–
material groups to be disposed of (metal, plastic, electrical part etc.)
Ensure that the parts are recycled again. Pay attention to the national directives.
14.2
Disposing of packaging
Ensure that the parts are recycled again. Pay attention to the national directives.
58