11
De-installation / dismantling
HAZARD
Hazard of explosion of an ignition-capable gas/air atmosphere!
Do not open or tip the fan if an explosive atmosphere exists.
WARNING
Risk from electrical voltage!
›
Switching off and de-installation only by a trained electrician or trained and instructed qualifi ed per-
sonnel!
›
Pay attention to the 5 rules of electrical engineering:
–
clear (all-pole separation of an electrical system from live parts),
–
secure against switching on again
establish freedom from voltage,
–
–
earth and short-circuit,
cover or fence off neighbouring live parts..
–
Carefully disconnect all electric lines.
Disconnect the EX fan from the supply connections.
CARE
Risk from impacts and cutting!
›
Wear protective gloves when dismantling!
›
Dismantle carefully.
Remove the fi tting material carefully.
Place the EX fan on the fl oor.
12
Disposal
Both the device and the matching transport packaging comprise recycling-capable raw materials to a very great extent.
12.1
Disposing of the EX fan
If the EX fan is to be fi nally dismantled and disposed of, proceed as follows:
Switch the EX fan free of voltage.
Disconnect the EX fan from the supply connections.
Dismantle the EX fan into its component parts.
Separate the parts resulting from this according to
–
reusable components
–
material groups to be disposed of (metal, plastic, electrical part etc.)
Ensure that the parts are recycled again. Pay attention to the national directives.
12.2
Disposing of packaging
Ensure that the parts are recycled again. Pay attention to the national directives.
Ex-fans - 06.2014
67