Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DE
DE
GB
GB
FR
FR
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment and
success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
We recommend:
1 Read through the complete text in the operating
instructions before installing and commissioning the
device.
2 The operating instructions are intended to help the
user to become familiar with the machine and take ad
vantage of its application possibilities in accordance with
the recommendations..
3 The operating instructions contain important informa
tion on how to operate the machine safely, professional
ly and economically, how to avoid danger, costly repairs,
reduce downtimes and how to increase reliability and
service life of the machine.
4 In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula
tions that apply for the operation of the machine in your
country.
5 Keep the operating instructions package with the ma
chine at all times and store it in a plastic cover to protect
it from dirt and moisture. Read the instruction manual
each time before operating the machine and carefully
follow its information. The machine can only be oper
ated by persons who were instructed concerning the
operation of the machine and who are informed about
the associated dangers. The minimum age requirement
must be complied with.
6 In addition to the safety requirements in these operat
ing instructions and your country's applicable regula
tions, you should observe the generally recognized
technical rules concerning the operation of identical
constructed machines.
internet: www.scheppach.com / email: service@scheppach.com / telefon: +(49)-08223-4002-99 / telefax: +(49)-08223-4002- 58
internet: www.scheppach.com / email: service@scheppach.com / telefon: +(49)-08223-4002-99 / telefax: +(49)-08223-4002- 58
DE
DE
GB
GB
FR
FR
DE
DE
GB
GB
FR
FR
DE
DE
GB
GB
2. Layout
1a Nozzle
1b Paint Flow Regulator
1c Trigger
1d Paint Container
1e Flow Regulator
1f
2a Manometer
2b Deflation Button
2c Quick Coupling Connector
2d Trigger
2e Valve Connection
3a Nozzle
3b Container
3c Trigger
3d Quick Coupling Connector
4a Nozzle
4b Trigger
4c Quick Coupling Connector
5a Air Tool Connection
5b Quick Coupling Connector
3. Scope of delivery
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the pack
aging and transport bracing (if available)
• Check that the delivery is complete.
• Check the device and its spare parts for possible
damage caused by transportation. In the event of
complaints, you must contact the distributor without
delay. Claims at a later stage will not be accepted.
• If possible, store the packaging until the warranty
period has expired
• Before handling the device, make yourself familiar
with it by reading the operating instructions.
• For accessories, consumables and spare parts, only
use original parts. Spare parts are available from your
stockist.
• Include our item number, the device model and year
of manufacture in your order.
m Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts!
m Danger
There is a risk of swallowing and suffo
FR
FR
DE
DE
DE
DE
GB
GB
GB
GB
FR
FR
Paint spray gun with gravity-feed can
Quick Coupling Connector
Tire pressure gauge
Compressed-air gun + suction-feed can
Compressed-air gun
Compressed-air hose
GB
cation!
15 /68
Werbung
Kapitel
Inhaltsverzeichnis
