Scheppach 3906101704 Originalbetriebsanleitung Seite 17

DE DE GB GB FR FR
This tool is not intended for use by persons (includ­
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern­
ing use of the tool by a person responsible for their safety
(local regulations can restrict the age of the operator)
Align the air tools away from yourself or other people or
animals. Solvents or diluents can etch skin, lungs and
eyes.
For your own safety always use the quick coupling
adaptor to connect the air tools to the air supply and al­
ways regulate the working pressure by using a pressure
regulator. Do not exceed the max. permitted working air
pressure. Please refer to the Technical Data.
Do not use oxygen or flammable gases as source of
energy.
Check if all connections and hoses are mechanically se­
cured and if they are functioning properly. Loose hoses
may cause severe injuries. Only use quick coupling
adaptors.
First remove the hose from the compressed air source
and disconnect the supply hose from the unit, to avoid
uncontrolled spinning or recoil of the supply hose.
Disconnect the air tool from the compressed air source
before doing any maintenance work or when not in use.
Always wear personal safety equipment when using the
spray gun. Toxic fumes and certain materials can be
poisonous. Those materials may create irritation or be
otherwise harmful to health. Follow the recommenda­
tions shown on the signs or written on the data sheets.
Always wear a respiratory protection. The safety class of
the system has to be in accordance with the processed
materials. Always wear safety gloves when processing
varnish or when cleaning the unit. We suggest wearing
ear and eye protection when operating the spray gun.
Please keep in mind that the spray gun causes strong
vibrations which can lead to repetitive strain injuries in
some cases. Keep sufficient rests.
When working with potentially explosive material, keep
in mind that static charges may result from circumstanc­
es such as cleaning of non-conductive parts with cloth,
the flow of liquids or air through hoses, when spray
painting, etc.
Do not continue using damaged air tools. Do not open
the units and do not try to repair them yourself. Contact
a professional or our customer service.
Never exceed the maximum allowable working pressure
of 8 bar. To adjust the working pressure use a pressure
reducer.
Do not bend the hose of the device. Otherwise it can be
damaged.
internet: www.scheppach.com / email: service@scheppach.com / telefon: +(49)-08223-4002-99 / telefax: +(49)-08223-4002- 58 internet: www.scheppach.com / email: service@scheppach.com / telefon: +(49)-08223-4002-99 / telefax: +(49)-08223-4002- 58
DE DE GB GB FR FR DE DE GB GB FR FR DE DE GB GB
Safety instructions for working with compressed air
and blasting guns
• Compressors and lines reach high temperatures dur­
ing operation. Avoid contact! Risk of burns!
• Gases or vapours drawn in by the compressor have
to be kept free of constituents that may cause fire or
explosions inside the compressor.
• When you disconnect the hose coupling, hold the cou­
pling element in your hand to prevent injury from the
whiplashing hose.
• Wear goggles when working with the blow-out gun.
Injuries may easily result from foreign bodies and
blasted parts.
• Never point the blow-out gun at other persons and
never use it to clean clothes that are still being worn.
Safety information for paint spraying
• Never process paints or solvents with a flash point be­
low 55°C.
• Do not heat lacquers and solvents as they are high­
ly inflammable. Solvent and coating materials may be
flammable or combustible when they are sprayed or
atomized. Always observe the warning and safety in­
formation of paint or solvent manufacturer.
• Do not keep or consume food and drink in the work
room. Paint vapours are harmful.
• The work room has to be bigger than 30 m
sufficient ventilation for spraying and drying. Never
spray into the wind. It is always imperative to observe
the regulations of your local police authorities when
spraying combustible or hazardous substances.
• Never process media such as white petroleum spir­
it, butyl alcohol and methylene chloride with the PVC
pressure hose (reduced life span).
• Keep your working area tidy. Only take as much paint
and thinner to your working area as required for com­
pleting the job. Do not keep paint and thinners in open
containers; store them in a safe place which is not
easily accessible to others.
• During painting no ignition source (e.g. open flames,
lid cigarettes, lamps not protected against explosion
etc.) may be present, because during painting explo­
sive gases may be formed.
Safety requirements for maintenance and service
• With daily use, clean the air spray guns preferably with
a washing device for spray equipment. Do not let the
spray gun for a long time in the washing machine.
• Do not use solvents or cleaning fluids based on hal­
ogenated hydrocarbons, such as Trichlorethane and
Methylenechloride, chemical reactions can occur on
the gun as well as on galvanized parts (Trichlorethane
with small quantities of water reacts to hydrochloric
acid). Thus the parts may oxidate; in the worst case
the reaction cause an explosion!
FR FR DE DE DE DE GB GB GB GB FR FR GB
and have
3
17 /68