Casio fx-CG50 AU Bedienungsanleitung Seite 584

k
E-CON4 Specific Setup Items
The items described below are E-CON4 setup items that displayed only when the
!m(SET UP) operation is performed in the E-CON4 mode.
Indicates the initial default setting of each item.
u
Data Logger
• {CLAB}/{EA-200} ... {CLAB Data Logger}/{EA-200 Data Logger}
u
Graph Func
• {On}/{Off} ... {show graph source data name}/{hide graph source data name}
u
Coord
• {On}/{Off} ... {show coordinate values}/{hide coordinate values} during trace operations
u
E-CON Axes
• {On}/{Off} ... {show axes}/{hide axes}
u
Real Scroll
• {On}/{Off} ... {enable real-time scrolling}/{disable real-time scrolling}
u
CMA Temp BT01
• {°C}/{°F} ... CMA Temperature BT01 measurement unit {°C}/{°F}
u CMA Temp 0511
• {°C}/{°F} ... CMA Temperature 0511 measurement unit {°C}/{°F}
u CASIO Temp
• {°C}/{°F} ... CASIO Temperature measurement unit {°C}/{°F}
u
Vrnr Baro
• {atm}/{inHg}/{mbar}/{mmHg} ... Vernier Barometer measurement unit {atm}/{inHg}/
{mbar}/{mmHg}
u
Vrnr Gas Prs
• {atm}/{inHg}/{kPa}/{mbar}/{mmHg}/{psi} ... Vernier Gas Pressure measurement unit
{atm}/{inHg}/{kPa}/{mbar}/{mmHg}/{psi}
u
Vrnr Mag F L
• {mT}/{gauss} ... Vernier Magnetic Field Low-amp measurement unit {mT}/{gauss}
u Vrnr Mag F H
• {mT}/{gauss} ... Vernier Magnetic Field High-amp measurement unit {mT}/{gauss}
ε
-2
E-CON4 Mode Overview