Status Display - Schaerer 062'011 Bedienungsanleitung

SCHAERER OPAL
d) Press the Programming button
save your Standby time setting.
This timer value will be stored and used
automatically until you change the pro-
gramming.
Note: On safety and energy-saving
grounds, we recommend you switch your
coffee maker off at the mains power switch
over night and when you go away. For
shorter absences, you can switch the ma-
chine to Standby by pressing the mode
selector switch.

9.4 Status display

a) Press the Programming button
Standby mode to display the following
active functions:
- if the selection button displays light
up, this indicates that the pre- brewing
function is activated;
- If the cleaning / rinse icon lights up,
this indicates that the rinsing
tionis activated;
- The Programming display shows the
time delay before the coffee machine
automatically switches to Standby
mode.
BAOP - 02 - V04
to
in
func-
9.5 Standard values / factory settings
Before your coffee machine leaves our
factory, we programme it with standard
settings which ensure optimum performance
under normal circumstances. If you adjust
these parameters to suit your individual
preferences, you can revert to these default
values at any time.
a) Switch the coffee maker to Standby
mode. The signal lamp (1b) will light up.
b) Press and hold down the Program-
ming button and the espresso se-
lection button (7) while simultane-
ously switching the machine to Ready
mode at the selector switch
This restores all of the factory default
settings.
User instruction
.
Page 63