Using The Radio Data System (Rds); Information Provided By Rds - Sharp SD-AT100H Bedienungsanleitung

Using the Radio Data System (RDS)

SD-AT100H
ENGLISH
RDS is a broadcasting service which a growing number of FM stations provide.
These FM stations send additional signals along with their regular programme
signals. They send their station names, and information about the type of pro-
gramme such as sports or music, etc.
When tuned to an RDS station, "RDS" and the station name will be displayed.
"TP" (Traffic Programme) will appear on the display when the received broadcast car-
ries traffic information, and "TA" (Traffic Announcement) will appear whilst a traffic
information is on air (see page 57).
"EON" will appear whilst the EON (Enhanced Other Networks information) data is
broadcast.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is
received.
"RT" (Radio Text) will appear whilst the unit receives the Radio text data.
You can control the RDS by using the remote control only.
[Front]
E-51

„ Information provided by RDS

Each time the DISPLAY button is pressed, the display will switch as follows:
[Back]
When you are tuning in to a station other than an RDS station or to an RDS station
which sends weak signal, the display will change in the following order:
Station name (PS)
Programme type (PTY)
NO PS NO PTY
FM 98.80 MHz NO RT
01/11/16 SD-AT100H(H)E6.fm
Frequency
Radio text (RT)