Sharp SD-AT100H Bedienungsanleitung Seite 297

„ DVD/CD player
Symptom Possible cause
z Is the disc loaded upside down?
Even though a disc has been
loaded, "NO DISC" or "NO
z Is the disc very dirty?
PLAY" is displayed.
z Does the disc satisfy the standards?
Playback sounds are
skipped.
z Is the unit located near excessive vi-
brations?
z Has condensation formed inside the
unit?
z Is the input not set to DVD?
The track number, etc. are
not displayed when a disc is
loaded.
z Is the disc very dirty?
The control buttons do not
function. Music or video play-
z Does the disc satisfy the standards?
back is interrupted.
z Is the unit located near excessive vi-
brations?
z Has condensation formed inside the
unit?
z Is the disc very dirty?
Pictures and sound are
skipped.
z Is the unit located near excessive vi-
brations?
z Has condensation formed inside the
unit?
z Is a disc other than DVD (region
The unit does not operate
even if the power is on. number 2 or ALL), video CD or audio
CD loaded?
z Are the video and audio cables con-
Image cannot be played
back. (Sound is not heard.) nected improperly?
z Is a disc other than DVD (region
number 2 or ALL), video CD or audio
CD loaded?
z Is the disc very dirty?
z Is the disc loaded upside down?
z Clean the optical pickup if it is dirty.
z Is the TV input set to "VIDEO 1/VID-
EO 2" etc.?
z Is the unit turned on?
„ Remote control
Reference Symptom
page
The remote control does not
operate properly.
P. 68
P. 19
The unit cannot be turned on
with the remote control.
P. 68
„ Condensation
Sudden temperature changes, storage or opera-
P. 68
tion in an extremely humid environment may
cause condensation inside the cabinet (laser
P. 6
pickup, etc.) or on the transmitter on the remote
control.
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc
P. 15
in the unit until normal playback is possible
(about 1 hour). Wipe off any condensation on the
P. 5, 6
transmitter with a soft cloth before operating the
unit.
P. 69
P. 64
P. 16
01/11/16
Possible cause Reference
page
z Is the battery polarity respected?
P. 18
z Are the batteries dead?
z Is the distance or angle incorrect?
P. 18
z Are there any obstructions in front of
the unit?
z Is the remote control sensor ex-
P. 18
posed to strong light (inverter fluo-
rescent light, direct sunlight, etc.)?
z Is the remote control for another
equipment used simultaneously?
z Are buttons on the front and back
faces of the remote control pressed
simultaneously?
z Is the AC power lead of the unit
P. 16
plugged in?
z Are the batteries inserted?
P. 18
SD-AT100H(H)E7.fm
SD-AT100H
ENGLISH
E-68