Operating Other Equipment - Sharp SD-AT100H Bedienungsanleitung

Operating other equipment

The connected TV and VCR can be operated with the remote control of this unit. The
factory setting allows you to operate Sharp's TVs and VCRs with it.
To operate those of other manufacturers, change the contents registered in the
remote control.
[Front]
TV
operation
„ Watching TV
1
Press the TV ON/STAND-BY button to turn on the TV.
2
Press the TV CHANNEL ( or ) button to set the channel.
3
Press the TV VOLUME ( or ) button to control the TV volume.
To enjoy the sound from the speakers of this unit:
Turn on the power of this unit and press the AV 1(TV) button.
„ Watching VCR
1
Turn on the power of this unit and press the AV 2 button.
2
Press the VCR ON/STAND-BY button.
[Back]
3
Press the TV/VIDEO button, and set the TV to VIDEO 1, VIDEO 2,
etc.
4
Press the VCR
VCR
Not only the playback but also stop, fast forward, fast rewind, and channel setting
operation
operations can be performed.
„ Watching digital tuner, etc.
1
Turn on the power of this unit and press the AV 3 button.
2
Turn on the digital tuner, etc.
3
Press the TV/VIDEO button, and set the TV to VIDEO 1, VIDEO 2,
etc.
4
Press the AV 3 button to switch between "AV3-A" and "AV3-D".
The same operation can be performed by pressing the DIGITAL INPUT button
on the main unit.
Caution:
Some Sharp TVs and VCRs cannot be operated with this remote control.
button to start playback.
Analogue connection Digital connection
01/11/16 SD-AT100H(H)E7.fm
SD-AT100H
ENGLISH
E-64