To Resume Playback After Stopping (Sequential Playback) - Sharp SD-AT100H Bedienungsanleitung

To select and play the desired chapter:
1
During playback, press the DIRECT button
twice.
2
Within 10 seconds, enter the chapter number us-
ing the direct buttons (0 - 9), and then press the
ENT button.
z If you enter the wrong number, press the CLEAR button and then reenter.
z You can also select the chapter number by pressing the
Notes:
z Some DVDs may not display the chapter number.
z Playback does not start if a chapter number higher than that on the disc is
selected.
To play by specifying time:
1
During playback, press the DIRECT button 3
times.
2
Within 10 seconds, specify the time with the di-
rect buttons (0 - 9) and then press the ENT but-
ton.
z To specify 1 hour 23 minutes and 40 seconds, enter "012340".
z If you enter the wrong number, press the CLEAR button and then reenter.
z If the time is entered with the
or buttons whilst setting the time, press the
or buttons to switch between hours, minutes, and seconds.
Note:
Playback does not start if you specify the time exceeding the actual recording time.
You can resume playback from the point that the playback is stopped.
[Front]
2 / 5
/ 3 0
0 1 : 3 0 0 8 :
2 / 5
1 0 / 3 0
0 1 : 3 0 0 8 :
or button.
„ To resume playback after stopping
(sequential playback)
2 / 5
1 0 / 3 0
: :
1
Whilst the disc is playing, press the DVD/CD
The system stores the point you stopped.
2 / 5
1 0 / 3 0
2
0 1 : 2 3 4 0 : To restart play, press the DVD/CD
Play resumes from the point you stopped.
3
To cancel this operation, press the DVD/CD
Notes:
z The sequential playback feature is disabled on some discs.
z Depending on the disc, playback may resume from slightly before the stopped
position.
z To start playback from the beginning, cancel this operation.
z Opening the disc compartment will cancel the sequential playback operation.
button.
button.
button twice.
01/11/16 SD-AT100H(H)E4.fm
SD-AT100H
ENGLISH
E-32