Proper Use; Safety Instructions; General Safety Information For Power Tools; Residual Risks - Scheppach 5901407901 Originalbetriebsanleitung

• 1 bolt bag: 5 hexagonal screws M8 x 50,4 hexagonal
nuts M8, 8 washers
• Allen key, 3 mm (23)
• Original Operating Manual

4. Proper use

The scroll saw is used for cutting angular timbers or
other materials such as Plexiglas, GRP, foam, rubber,
leather and cork. Never use the saw to cut round mate-
rial. Round material can tilt easily.
Danger of injury! Parts may be ejected!
The device may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
Please note that our equipment was not designed with
the intention of use for commercial or industrial purpos-
es. We assume no guarantee if the device is used in
commercial or industrial applications, or for equivalent
work.
• Only suitable saw blades may be used for the ma-
chine.
• An element of the intended use is also the obser-
vance of the safety instructions, as well as the as-
sembly instructions and operating information in the
operating manual.
• Persons who operate and maintain the machine
must be familiar with the manual and must be in-
formed about potential dangers.
• In addition, the applicable accident prevention regu-
lations must be strictly observed.
• Other general occupational health and safety-relat-
ed rules and regulations must be observed.
• The liability of the manufacturer and resulting dam-
ages are excluded in the event of modifications of
the machine.

Residual risks

Even when this power tool is operated properly,
residual risks still remain. The following hazards
may arise in connection with the design and con-
struction of this power tool:
• Lung damage if suitable dust protection mask is not
worn.
• Hearing damage if suitable hearing protection is not
worn.
• Risk of accident due to contact with the hands in the
uncovered cutting area of the tool.
• Danger of injury during a tool change (cutting haz-
ard).
• Crushing of fingers.
• Danger due to kick-back.
• Tilting of the workpiece due to insufficient workpiece
support surface.
• Touching the cutting tool.
• Ejection of branches and workpiece parts.

5. Safety instructions

5.1

General safety information for power tools

m WARNING!
Read all safety warnings, instructions, illustra-
tions and specifications provided with this power
tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control
2. Electrical safety
a) Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
www.scheppach.com GB | 27