Scheppach MFH5200-4P Originalbetriebsanleitung Seite 45

WARNING
Please observe the legal provisions from the noise pro-
tection ordinance.
The noise and vibration values have been determined
through a standardised measurement process.
Noise data
Grass trimmer:
Sound pressure level L
pA
Sound power level L
wA
Measurement uncertainty K
Brush cutter:
Sound pressure level L
pA
Sound power level L
wA
Measurement uncertainty K
Hedge trimmer:
Sound pressure level L
pA
Sound power level L
wA
Measurement uncertainty K
Pole-mounted pruner:
Sound pressure level L
pA
Sound power level L
wA
Measurement uncertainty K
Vibration parameters (hand/arm vibration)
Lawn trimmer a
hv
Brush cutter a
hv
Hedge trimmer a
hv
Pole-mounted pruner a
hv
Measurement uncertainty K
The total noise emission values specified and the total vi-
bration emission values specified can also be used for an
initial estimation of the load.
WARNING
The noise emission values and vibration
emission value can vary from the specified
values during the actual use of the product,
depending on the type and the manner in
which the product is used, and in particular
the type of workpiece being processed.
Try to keep the stress as low as possible. For example:
Limit working time. In doing so, all parts of the operating
cycle must be taken into account (such as times in
which the product is switched off or times in which it is
switched on, but is not running under a load).
97.6 dB
114 dB
3 dB
wA
97.6 dB
113.9 dB
3 dB
wA
96.3 dB
109.9 dB
3 dB
wA
96.2 dB
109.7 dB
3 dB
wA
Front handle / rear handle
5.83 m/s² / 8.14 m/s²
5.81 m/s² / 8.16 m/s²
5.83 m/s² / 8.14 m/s²
5.84 m/s² / 8.16 m/s²
1.5 m/s
www.scheppach.com
7 Unpacking
WARNING
The product and the packaging material are not
children's toys!
Do not let children play with plastic bags, films or
small parts! There is a danger of choking or suffo-
cating!
• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. Immediately report any damage to the trans-
port company that delivered the Product. Later claims
will not be recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
8 Assembly
WARNING
There is a risk of accident! Always carry out
adjustment or assembly work when the en-
gine is switched off. There is a danger of inju-
ry! Allow the product to cool before any ad-
justment or assembly work. Elements of the
engine are hot. There is a danger of injury
2
and burning!
The product can start unexpectedly and cause injuries.
– Switch off the engine before carrying out any adjust-
ment or assembly work.
– Disconnect the spark plug connector from the spark
plug.
– Allow the engine to cool down.
– All protective and safety equipment must be refitted
immediately when adjustment or assembly work is
completed.
DANGER
Danger of injury!
If an incompletely assembled product is used, serious
injuries can be caused.
– Do not use the product until it has been fully fitted.
– Before each use, carry out a visual inspection to
check that the product is complete and does not
contain any damaged or worn components. Safety
and protective devices must be intact.
GB | 45