Motor Connection - Lenze 8200 motec Montageanleitung

Installation
Motor mounting
3.3.3

Motor connection

{
Fig. 31 Motor connection for motor mounting
X2/PE2
X2/BR1, X2/BR2
X2/T1, X2/T2
80
efesotomasyon.com - Lenze
Danger!
After the connection of a PTC thermistor or thermal contact all control terminals
l
only have a basic insulation (single insulating distance).
Protection against contact in the event of a defective insulating distance can only
l
be ensured by external measures (e.g. double insulation).
Do not use the terminal
Connection terminals brake resistor
(Information concerning the operation with brake resistor is included in the operating instructions)
Connection terminals motor temperature monitoring with PTC thermistor or thermal contact
Activate the motor temperature monitoring under C0119 (e. g. C0119 = 1)!
EDK82MV752 DE/EN/FR 6.0
82
8200mot408
L