Brita Top Compact Original Bedienungsanleitung Seite 36

Technical data
Top Compact
Cooling Performance
Flow rate
Voltage
Current, max.
Power consumption, max.
Frequency
Protection class
CO max. operating pressure
2
Inlet water pressure, max.
System operating inlet water pressure
Inlet water temperature
Surrounding temperature range
Relative humidity, max.
Refrigerant
Noise emission
Height above sea level
Dimensions and weight:
Width
Depth (with / without drip tray)
Height
Weight, max.
Weight Base cabinet
Weight Base cabinet with base plate
Dispensing height (with drip tray)
(without drip tray)
Specifications may vary due to further development and improvement of the
products.
68 | EN
15 l/h / 22 l/h for Still
2 l/min
220 – 240 V
0.62 A / 0.43 A for Still
117 W / 83 W for Still
50 Hz
/ I
0.45 MPa / 4.5 bar
0.6 MPa / 6 bar
0.4 MPa / 4 bar
5 – 25° C
10 – 32° C
60 %
R600a, 20.6 g
< 70 dB(A) / < 50 dB(A) for Still
< 2000 m
264 mm
436 mm / 408 mm
382 mm
16 kg
16 kg / 15 kg for Still
23 kg
302 mm
330 mm
Identification plate
The identification plate is on the back of the appliance.
Dismantling and disposal
Once the end of use for the water dis-
penser has been reached, it must be
dismantled and undergo environmen-
tally friendly disposal.
The dismantling and disposal is to
be carried out exclusively by per-
sonnel of the manufacturers or by
qualified persons.
The pictogram with the crossed out dustbin points to the requirement
for separate disposal of electrical and electronic appliances (WEEE).
Electrical and electronic appliances can contain hazardous and envi-
ronmentally hazardous materials. Do not dispose of this appliance as
domestic waste. Hand it in at a collection point for electrical and electronic
waste. The packing material is 100 % recyclable. The various parts must
therefore be disposed of responsibly and in full compliance with local authority
regulations. By doing so, you will help to conserve resources and protect the
environment. For further details, please consult your dealer or your local
authorities.
WARNING!
Danger to life from improper
dismantling!
Errors in dismantling can lead to
life-threatening situations or sub-
stantial property and environmental
damage. This leads to risks, among
other things, from electrical cur-
rent, carbon dioxide or CO bottle
2
pressure.
• The dismantling is exclusively to
be carried out by the manufactur-
er or qualified persons.
• Consult the manufacturer, even in
the case of a change of location.
• Refrain from unauthorised dis-
mantling and change of location.
EN | 69