Brita Top Compact Original Bedienungsanleitung Seite 31

Top Compact
1
2
3
4
5
6
7
8
9
Maintenance
Housing and ventilation grills Check the CO
Cleaning the housing Check the fill level of the CO
bottle
1. Check whether the shut-off
valve B is open. Therefore, it
needs to be in a vertical posi-
tion, as shown below.
2. If the pressure display on the
manometer for the bottle pres-
sure A is indicating the red
Rub with a cleaner for powdercoated zone, change the bottle (see
surfaces. 'Replacing CO
Allow the cleaner to work for a few page 60).
minutes. Rub off with a dry, lint-free
cloth.
Clean the touch pad (2) with a lint-
free cloth and a mild cleaning agent.
A
Remove rear panel (see page 53)
and clean the ventilation grills with a
suitable brush or scrubber, or use a
vacuum cleaner.
B
58 | EN
Please observe the foldout page!
bottle Schedule
2
For the optimum and trouble-free operation of the water dispenser, please
2
make sure to carry out the works described in the next section according to the
schedule illustrated below.
If increased wear is identified during routine checks, the required intervals
should be shortened in accordance with the actual signs of wear.
Contact customer service with any questions regarding maintenance work and
intervals (see rear page).
Maintenance works to be carried out by the operator
gas bottle' on Interval
2
Daily
Weekly
Twice a year
Whenever necessary
Maintenance works to be carried out by the manufacturer
or a qualified person
Task
Water filter replacement*
Sanitizing
Technical check
(internal/external components)
Electrical safety test
Backflow preventer check
* A higher frequency might be required, depending on consumption.
Component Task
Drip tray Empty
Clean
Housing and display Clean
Tap outlet Clean
Ventilation grills Clean
CO bottle Check fill level
2
Replace
Interval
Once a year
Once a year or after a standstill period
of longer than 4 weeks
Every year
Every 2 years
Once a year
EN | 59