Brita Top Compact Original Bedienungsanleitung Seite 29

Top Compact
1
2
3
4
5
6
7
8
9
Using the device
Acoustic signals setting
Acoustic signals are off by default. Activate / deactivate acoustic
signals
1. 2. 5. Blinking touch pad button shows
current setting mode.
Activate acoustic signals by
pressing
vate acoustic signals by pressing
once briefly. Button lights
white for 1 second, mode is set.
6. Save settings: Press and hold
Activate setting menu setting button for 5 seconds or
wait for 15 seconds until device
1. Remove rear panel (page 53). returns from settings menu auto-
2. Press and hold setting button matically.
(please see above) for 5 sec- 7. Reinstall the rear panel (page
onds. 53).
3. Touch pad buttons (2) blink
white. Setting menu is activated.
Setting modes:
Activate acoustic signals menu
4. To enter the acoustic signal Acoustic signals mode:
setting menu, press lock button On
once.
Acoustic signals mode:
Off
54 | EN
Please observe the foldout page!
Portion setting
Activate setting menu
1. Remove rear panel (page 53).
2. Set a suitable vessel under the
tap outlet (1).
once briefly. Deacti- 3. Press and hold setting button for
5 seconds. The buttons on the
touch pad (2) blink white.
Activate portion setting menu
4. Press once to enter portion
setting menu. Button lights up for
1 second, acoustic signal chimes
1x.
Set portions
5. Press and hold respective water
type button until the desired
amount of water is dispensed.
Make sure not to overfill the
vessel.
6. Repeat with the other water
types, if necessary.
7. Restore rear panel (page 53).
Remove dispensing preset
Activate setting menu
1. Remove rear panel (page 53).
2. Press and hold setting button for
5 seconds.
3. Touch pad buttons (2) blink white.
Settings menu is active.
Activate dispensing preset menu
4. Press once to enter the dis-
pensing preset menu.
Switch off / on dispensing preset
5. Blinking touch pad button shows
current setting mode. Activate
dispensing preset by pushing
once briefly. Deactivate dispensing
preset by pushing once briefly.
Respective button lights up for 1
second, mode is set.
6. Save settings: Press and hold
setting button for 5 seconds or wait
for 15 seconds until device returns
from settings menu automatically.
7. Restore rear panel (page 53).
Setting modes:
Dispensing preset mode:
On
Dispensing preset mode:
Off
EN | 55