Top Compact
1
2
3
4
5
6
7
8
9
Using the device
Please observe the foldout page!
Water temperature setting
Activate setting menu
Set water temperature
5. Press button for the desired water
1. Remove rear panel (page 53).
temperature once. Respective
2. Press and hold setting button for
button lights up for 1 second,
5 seconds. Touch pad buttons (2)
acoustic signal chimes 1x: Water
blink white. Setting menu is active.
temperature is set.
6. Save settings: Press and hold set-
ting button for 5 seconds or wait
Activate temperature setting menu
for 15 seconds until device returns
3. Press
(or
for Still version)
from settings menu automatically.
once to enter water temperature
7. Restore rear panel (page 53).
setting menu. Temperature setting
mode is active.
4. Blinking touch pad button (2)
Available temperatures:
shows current temperature setting.
Temperature setting:
Note: For safety reasons, the
10 °C
dispenser has an integrated over-
heating protection that is activated if
Temperature setting:
outside temperatures are too warm
8 °C
or the device is overused. It sets
the temperature up stepwise by 2°C
(max. up to 10°C), if necessary, and
Temperature setting:
resets to the originally set tempera-
6 °C
ture after a certain time frame (max.
after 24h). Hence, if water seems to
be warmer than usual, the over-
heating protection might be active.
Temperature setting:
Wait until device resets for dispens-
4 °C
ing the originally set temperature.
56 | EN
Maintenance
Drip tray
Tap outlet
Emptying and cleaning the
Cleaning the tap outlet
drip tray
1.
1. Remove drip
tray (5) and
empty it.
1. Remove the nozzle cover (1).
2.
2. Remove the
2. Spray the tap outlet with an disin-
grille from the
fectant alcohol spray.
drip tray (5) and
3. Allow the spray to soak in for a
clean both.
few minutes and then rub it off
with a sterile and lint-free cloth.
3.
3. Reinstall the
WARNING!
grille and
Danger to health from con-
replace the
tamination!
drip tray (5).
Not following the hygiene guide-
lines can lead to contamination
of the end product and could be
harmful for the consumer.
1. Only touch the tap outlet with a
Note: The drip tray is fixed with mag-
sterile and lint-free cloth.
nets. Keep that in mind when handling
2. Only touch the tap outlet for
objects sensitive to magnets.
cleaning.
EN | 57