Brita Top Compact Original Bedienungsanleitung Seite 26

Top Compact
1
2
3
4
5
6
7
8
9
Overview Contents
Please observe the foldout page!
Safety instructions
Overview
Used symbols
1. Nozzle cover/Tap outlet Intended use
2. Touch pad Location
3. Rear panel handle Storage
4. Ventilation grill Using the device
5. Drip tray • Startup
6. Base cabinet • On/Off
7. Base cabinet door • Standby/Lock
8. Water filter • Dispensing water
9. CO bottle • Install/Remove rear panel
2
• Acoustic signals setting
• Portion setting
• Remove dispensing preset
• Water temperature setting
Maintenance
• Drip tray
• Tap outlet
• Housing and ventilation grills
• Check the CO
• Schedule
Replacing CO
Period of inactivity
• After a longer period
of inactivity
Troubleshooting
What to do in an emergency
• Water leakage
• Refrigerant leakage
• CO leakage
2
• Electric shock
Used symbols
Technical data
Identification plate
Warning of a risk to health and Dismantling and disposal
property. Base cabinet
Warning of dangerous voltage.
Danger of combustibility.
Please read this user manual
carefully and keep it for further
reference.
48 | EN
Intended use
40 Use according to the intended pur-
48 pose: The water dispensers of the
48 Top Compact product range are solely
49 designed to dispense different water
49 types. The water dispensers may only
49 be used with tap water provided by the
50 waterworks. This mains water fulfils
50 the statutory requirements of drinking
50 water quality.
51
52 The water dispensers are designed
53 for professional use within the gastro-
54 nomical and hotel industry, catering
55 services, business buildings and
55 offices, etc.
56
57 The dispensed water is only intended
57 for immediate consumption.
57
58 The use according to the intended
bottle 58 purpose assumes compliance with
2
59 all the information contained in these
gas bottle 60 instructions.
2
62
Any use beyond the intended purpose
63 or other types of use are considered
64 misuse.
66
66 In the event that public authorities
66 request that the mains water must
66 be boiled, this also applies to BRITA
66 filtered water.
68
69 Once the request has ended, the inlet
69 water filter must be replaced and the
70 connections cleaned. Please contact
customer service for this purpose (see
rear page).
Location
Caution:
Make sure that the device is
always sufficiently ventilated. Never
obstruct or block the ventilation slots
or cooling fins. Do not cover lateral
openings of the device. Always keep
the distance to walls and other ob-
jects as described in the information
sheet delivered by the manufacturer.
Do not place any objects on top of the
device on account of uprising heat.
The water dispenser may not be
installed near direct or indirect heat
sources. Hoses and cables must not
come into contact with heat sources.
The CO bottle must be placed
2
as far as possible from any heat
sources and the ambient tempera-
ture should not exceed 32 °C.
To relocate the installed device,
please contact customer service
(see rear page). Any relocation must
be carried out by a qualified person
and documented in the log book.
For more information, see "Safety
Instructions", page 40 – 47.
Storage
Store the water dispenser in the
following conditions:
• Do not store outdoors.
• Store in a dry, frost- and dust-free
location.
• Do not expose to any aggressive
media.
• Avoid mechanical shocks.
• If storing for over 3 months, regularly
check the general condition of all
parts and of the packaging.
• Store and use vertically.
EN | 49