HOMCOM 800-254V70 Bedienungsanleitung Seite 22

EN
3. The length of cleaning period is related to your water quality. And drain the water more
frequently, the unit and its water pump can work much longer.
4. When there are ice cubes on the surface of the evaporator, but can't fall off easily, do not
use the mechanical substance to remove it by force; Only press the "ON/OFF" button for
more than 5 seconds, the unit will enter the ice melting process, after some while, the big
ice-cubes will fall down, then turn off the unit and unplug the power cord to clean the
surface of the evaporator.
5. For the water tank and ice-full detecting plate
Also the water tank and the ice-full detecting plate is very important to keep your ice cube
hygienic. Put mixture of neutral cleaner & water into a clean water jet, then spray to all the
inner surface of tank & the ice detecting plate. Wipe these surfaces as far as possible with a
clean cloth. And then, spray the surfaces with clean water, wiping with a dry clean cloth.
Then drain out the cleaned water in the water tank by pulling out the Water drain pipe of the
water tank indicating "H" in above illustration. When all of the cleaned water has been
drained out, to install back the water drain pipe of the water tank.
Suggestion:
After cleaning the interior parts and install back to its respective position, and return
machine to work, discard first batch of ice.
Ice-full detecting plate
Water tank
21