HOMCOM 800-254V70 Bedienungsanleitung Seite 18

EN
How to cancel the ON-Timer:
Press the "TIMER/TIMER" button, the number above the "
the present delay time of your ON-Timer, and press this button once again to cancel the
Timer setting, also the "
way to cancel the ON-Timer is to press the "ON/OFF" button, it will cancel the ON-TIMER
setting by force.
How to set the OFF-Timer:
When the unit is working, press the "TIMER/CLEAN" button to set the OFF- Timer. The
" " symbol will start to be on, the number "1" above the symbol will flash to display the
setting delay time. During the number flashing, press "+" "-" button to change the delay time
of the timer, 1 hour increasing or decreasing per each pressing of "+" or "-" button. Five
seconds after setting, your desired setting will be remembered.
How to cancel the OFF-Timer:
Press the "TIMER/TIMER" button, the number above the "
the present delay time of your OFF-Timer, and press this button once again to cancel the
Timer setting, also the "
easy way to cancel the OFF-Timer is to press the "ON/OFF" button, it will cancel the ON-
TIMER setting by force, also will turn off the unit.
Internal LED light operation
When the unit is plugged on, press the "LIGHT" button on the operation panel once to lighten
the LED light inside the ice bin and the "
on. Press this button once again, the LED light and the "
NOTE: If you press the "LIGHT" button for more than 5 seconds, the ambient can be changed
between Centigrade degree and Fahrenheit degree（ between ℃ and ℉） 。
ERROR code of unit breakdown
When the unit is breakdown, the error code will display in the left side of LCD display
window.
E1 means the sensor of ambient temperature is malfunction.
E2 means that ice making program is abnormal, including too big ice- cube, no ice-
cube falling down, or not making ice cube, etc.
NOTE: During the ice cube making process, press "ON/OFF" button for more than 5 seconds,
the unit will jump into the ice-harvest process. After the ice harvest process is completed, the
until will recover to ice making process.
" symbol and the number will disappear. And the second easy
" and the above number will disappear; And also, the second
" symbol on the LCD display window will also be
17
" symbol will flash to display
" symbol will flash to display
" symbol will be off at same time.