HOMCOM 800-254V70 Bedienungsanleitung Seite 16

EN
Ice making program is explained in following chart:
Step 1: Standby state
Step 6: During ice-
harvest, water-flowing
process finished to
start to make ice-cube
again.
I: Manual water supplying symbol; O: Automatic water supplying symbol;
Arrow of this symbol flashes, means the water is flowing into the water tank.
If this whole symbol keeps displaying, means no main water supplying at present.
Ice-cube symbol, when it rotates, means unit is making the ice cube; and it flashes,
means the unit is in ice harvest process.
℃: Centigrade(ambient temperature） H: unit of hour (setting the timer）
M: unit of minute（ ice-making setting and countdown time）
1. Plug on the main power supply plug, then press "ON/OFF" button on the control panel to
begin the ice making cycle. The unit ON/OFF state symbol will keep lighting on, the left
number in the LCD display window displays the present ambient temperature, and the
right number displays the present ice-making setting, and the ice-cube symbol rotates.
When the left number change to flash, then the number means the countdown time to
complete one ice making cycle.
2. Each ice making cycle will last about 11 to 20 minutes, depending on the ambient
temperature and the water temperature. And for the first time, according to the initial water
temperature, ice-making last time will be a little longer.
Step 2: The arrow
Press
flashes, water flows in
ON/OFF
the unit.
button to
turn on
the unit.
Step 5: Ice-harvest
starts, and ice-cube
symbol flashes; At
same time the arrow
flashes and water flow
into the water tank.
15
Step 3: Start to make
ice, and ice-cube
symbol rotates.
Step 4: Display the
countdown time of one
ice-making process.