G) Saving/Deleting User Codes And Transponders - Renkforce IP65 Bedienungsanleitung

g) Saving/Deleting User Codes and Transponders

Important!
If you switch on the "Auto-Entry" function (see chapter 11. m), all codes must have the
same length (e.g. master code + superuser code + user codes 5 digits).
The code lock can save up to 1100 user codes and transponders in total. Output #1 has 1000
memory slots, output #2 has 100.
The following pages provide a general description of the procedure as well as various programming
examples for the different options of having the code lock activating one of the outputs (and, e.g.,
granting access via a door opener this way).
We recommend drawing up a table and precisely recording all access data (user name,
memory slot number, switching process for output #1 or #2, access type and access
data, e.g. transponder number, user code, secondary code).
Only this will give you an overview of who is signed on at the code lock and what the
user is permitted to do from case to case.
It also makes it very easy to delete a user or a lost transponder.
Important!
If you take too long during programming (and do not push a button for a few seconds),
programming is cancelled. Start programming anew then.
85